NEIEP Hoistway Maintenance (555) Practice Test

These questions are part of the practice quiz. Start practicing

• What should be regularly inspected on a hoistway door?
• In terms of rope lubrication, which factor primarily influences the frequency needed?
• How does modern technology impact hoistway maintenance?
• When testing the five year car buffer, what safety should be temporarily disabled?
• The frequency of lubrication of ropes is determined by what factors?
• The compensating sheave switch must open before the sheave reaches which limit of travel?
• Which of the following is a reason for enhancing service quality in elevator operations?
• When testing walk-through safety devices, an important check is to ensure they __________.
• When releasing a drum-operated type B safety, where is one man stationed?
• The electric eye light source must align with what component?
• When placed in the off position during Phase 2, what operation occurs after the doors have closed?
• What is the function of the safety gear in an elevator?
• What is the purpose of guide rails in an elevator hoistway?
• The counterweight governor tripping speed should be calibrated to what percentage above the car governor trip speed?
• Where should the car be placed on inspection before bypassing any circuit?
• What is the purpose of an emergency stop switch in an elevator?
• Why is compliance with regulations vital in the elevator industry?
• An imbalance in rope tension results in what kind of issue?
• What is a key indicator of a malfunction in an elevator control system?
• What stopping means is to be disabled for the emergency terminal stopping test?
• What is the correct sequence of operations before servicing an elevator door motor?
• What is a crucial safety component installed on hoist rope shackles?
• Which maintenance issue can result from improper rope equalization?
• When performing the brake test at 125% capacity, which performance metric is crucial?
• When testing the normal terminal stopping device, it is checked to stop in what location?
• Testing at low speeds can expose what potential issue during high-speed tests?
• Why is it important to enhance efficiency in elevator operations?
• What function does a sensing edge serve in elevator doors?
• Which type of safety generates a high retarding force the moment it is applied?
• What must be activated to prevent the elevator car from moving when working in the pit?
• Why is it important for phase 2 to maintain pressure on the door open button?
• How is electrical safety assured in hoistways?
• How often should Fire Service be tested to assure proper operation?
• What is typically required to successfully test the buffers in an elevator system?
• What should the maintenance personnel ensure regarding the elevator car's capacity?
• What should the clearance from the upthrust roller to the door track ideally be?
• What is a potential consequence of not maintaining the hoistway correctly?
• In a maintenance context, what is the role of an anti-rotational device?
• What is a common indicator of brake wear on an elevator?
• What safety feature must be managed carefully to avoid excessive governor rope slack?
• In what scenario would an elevator be taken out of service?
• Which of these measures can ensure safe operation during a fire service emergency?
• How are routine inspections for elevators typically performed?
• Why is it essential to stay updated with advancements in elevator technology?
• To release type A and self-releasing type B safeties, what initial action is required?
• Which safety mechanism prevents the elevator car from free falling?
• What will happen to the doors on Phase 2 if pressure is interrupted on the door open push button?
• Kinetic energy is influenced by which two factors?
• Counterweight safeties are to be _______ on the rail.
• After compressing the buffer during a test, what must occur with the hoist ropes?
• In Phase 2, what is the condition of the doors after reaching the open limit?
• How many turns of rope should remain on the safety drum after a rated load speed safety test?
• Can mechanical binds be overcome with electrical adjustments?
• What must be temporarily disabled to conduct a counterweight safety test?
• When assessing an elevator's safety, which aspect is crucial before performing operations at an upper landing?
• Which conditions must be avoided during a five year counterweight buffer test?
• Why is maintaining records of elevator inspections significant?
• How is the release of the drum-operated type B safety defined?
• For a link driven swing arm type of passenger door operator, the link arm converts _______ motion into _______ motion.
• What is the main purpose of checking load weighing devices?
• What type of cleaning fluid should be used to clean hoist ropes?
• What safety consideration is emphasized when loading an elevator car?
• What should be checked if the elevator fails to level correctly at a landing?
• How do you assess the condition of hoist cables?
• Which safety test is commonly performed on hoistway doors?
• What is the primary goal of the car buffer tests?
• The safety-edge retracting device must function in which door positions?
• Which of the following is a benefit of regularly updating knowledge on elevator technology?
• Prior to loading an elevator car at an upper floor, which safety standard must be met?
• Why is load testing important for elevators?
• How does upgrading elevator technology relate to employee training?
• What does the annual testing of the governor involve regarding its parts?
• What function does a limit switch serve in an elevator system?
• How does compliance with safety standards benefit elevator maintenance?
• What function is performed by the nudging operation when engaging the doors?
• The toe guard length should be at least the leveling zone plus how many additional inches?
• What role do hydraulic fluids play in elevator systems?
• What is the purpose of the TM switch or _______ switch at the terminal landing?
• What type of devices should be checked and adjusted after the 5-year test?
• What is a potential consequence of neglecting advancements in elevator technology?
• Who is responsible for the maintenance of pit lighting, sump pump, duplex outlet and the pit ladder?
• What type of energy is a factor of both weight and speed in door operation?
• Traveling cables with different diameters should be _______ at different points under the car to _______ properly.
• What is essential for ensuring the smooth operation of an elevator car?
• Center and side opening doors must be flush with the _______ in the full open position.
• How high should an additional pit switch be mounted above the pit floor when required?
• How do you assess the performance of an elevator brake system?
• During normal operation, what two aspects should be observed in the doors?
• What two actions must be taken regarding the pit switch, compensation switch, buffer switch and final limit switch?
• What occurs if the governor tripping speed is not calibrated correctly?
• If red dust or roughing is found during hoist rope inspection, what action is recommended?
• What can cause sheave grooves to wear unevenly?
• What are the two functions an elevator loaded to 125% capacity must be able to perform at a floor?
• What is the primary function of a governor in an elevator system?
• What is the primary function of the governor in elevator systems?
• Prior to allowing passengers to enter, maintenance teams must verify the elevator is capable of what?
• What is the role of the counterweight in an elevator system?
• What is one effect of not keeping up with industry advancements in elevator technology?
• What is a potential consequence of not addressing rope slippage?
• What should you check for on the counterweight sheave?
• The three most common types of relating devices are relating cables, _______ and _______.
• In most cases, how is a passenger elevator loaded for the five year brake test?
• What must be installed on the shackles to prevent rope spinout when required?
• What materials are commonly used to manufacture hoistway doors?
• The verification of which system is necessary to ensure safe elevator operation at upper landings?
• What crucial aspect must an elevator meet during a buffer test regarding its speed?
• Which of the following components is NOT typically found in the hoistway?
• When checking the hoist rope shackles, which components should be inspected?
• To successfully perform a buffer test, which limits must be disabled?
• Which maintenance activity is essential for ensuring elevator safety?
• Which of the following is NOT important to check during door operation?
• What components are involved in the door opening system of an elevator?
• As the car moves through the hoistway, what may change regarding rope tension?
• What percentage safety margin must elevators adhere to when weighing loads for upper floor operations?
• What is the minimum running clearance that must be maintained between the face of the door pick up rollers and the car sill?
• What is a key factor in ensuring high-quality elevator services?
• During the five year counterweight buffer test, what condition is used?
• What is a car top emergency switch?
• What should be ensured about the governor rope during the governor test?
• When inspecting door-related belts and cables, you should check for _______ and proper _______.
• Nudging operation of the doors functions at which speed?
• The clearance from the roller to the door track is specified in what unit of measurement?
• Before performing a buffer test, what must be verified as correct?
• What happens when the Phase 2 switch is placed in the hold position?
• In Phase 2 fire service operation, how are power-operated doors controlled?
• What is the role of traction in hoistway systems?
• What type of communication system is commonly utilized for hoistway maintenance?
• The car must be capable of safely lowering, stopping, and holding at what load percentage?
• What should you use whenever possible to enter the pit?
• Why is it important for all types of safeties to be lubricated and inspected?
• What does the mechanical doorstops contact signal after the operate?
• What methods are used to simulate failure during the testing of safeties and buffers?
• What is the requirement for the safety devices in relation to their operational functionality?
• How many times the diameter of the traveling cable is the traveling cable loop approximately?
• Which statement about elevator car testing is true?
• Why is adhering to safety standards critical in elevator maintenance?
• What happens during the compression stroke of buffers in type C safeties?
• What are the primary components of a hoistway?
• What are the three types of safeties used in hoistway maintenance?
• Why is lubrication important in hoistway maintenance?
• Hoistway door locks are always a configuration of what type?
• What is typically tested during the maintenance of electrical components in hoistway systems?
• Which of the following is a critical component of elevator safety systems?
• What should be contacted after the door operates?
• What should you monitor when inspecting hoist ropes for wear and damage?
• During Phase 1 operation, what happens to door reopening devices sensitive to smoke or flame?
• Type A safeties are limited to elevators with a rated speed of not more than what speed?
• What equipment might be found in secondary levels located under the machine room?
• What happens if the safety device does not apply evenly?
• What is one of the purposes of testing the car buffer during the five year maintenance?
• What is required for the successful completion of the buffer test in terms of oil?
• If alignment of electric eye units is required, what should be maintained?
• What role does elevator technology play in achieving operational efficiency?
• Five year testing of safeties for types A, B, C car safeties must be tested at what conditions?
• What does "hoistway ventilation" refer to?
• What is the function of the door operator in an elevator system?
• When the pit exceeds a certain depth, an additional pit switch is required near the pit ladder. What is that depth?
• How do you check the alignment of the guide rails?
• Before getting on top of the elevator, which switch should you actuate first?
• Why is it crucial to document maintenance activities for hoistways?
• What is the purpose of emergency recall procedures in elevators?
• What is the function of a buffer in an elevator system?
• In the context of hoistway doors, what does a latch do?
• What type of motion is the drive wheel commonly converted into for passenger door operations?
• What type of safety develops retarding force during the compression stroke of one or more buffers?
• It is important to ensure that the car will hold what percentage of capacity at the lowest landing before loading it at an upper floor?
• What is the term for the amount that the governor imparts on the governor rope?
• What is the purpose of the toe guard in an elevator system?
• What type of maintenance action is typically involved in the release of a type B safety?
• What is one of the main functions of a safety device in a hoistway?
• What is a critical pre-load check to ensure elevator safety according to load-bearing standards?
• What must the hoist ropes do if the car or counterweight comes to rest on their buffer?
• The purpose of suspended traveling cables is primarily to __________.
• How often should hoistway maintenance ideally be conducted?
• What action is performed by tripping the governor during five-year safety tests?
• Why is it important to adjust load weighing devices after testing?
• The gate switch must not close until the door is within how many inches from the close jamb?
• What button's pressure must be maintained to keep the doors open in Phase 2?
• When checking the car door closing force, the doors should be positioned between what fractions of their travel?
• What effect does the annual testing of car and counterweight safety have on elevator equipment?
• What are common maintenance tasks performed on hoistway systems?
• In hoistway maintenance, what does "worn sheave" refer to?
• The five year car buffer test should be performed at which load and speed?
• What is an advantage of enhancing elevator service quality?
• What is the purpose of a hoistway pit ladder?
• How often should smoke detectors be serviced in hoistways?
• What equipment is used for testing the performance of a hoist system?
• How do you prevent unauthorized access to the hoistway?
• For a Category Five test, how should safeties be operated?
• The need for good _______ with building personnel and coworkers is necessary for the safety of everyone involved.
• What does the term "overspeed" refer to in hoistway systems?
• What can a power outage cause for hoistway operations?
• What should never be entered or stepped over in the pit to ensure safety?
• What frequency of lubrication and maintenance is recommended for safety devices?
• What action should be taken if an elevator car does not meet the capacity requirement before loading?
• Which type of safety is not allowed to be used on elevators with a rated speed exceeding 150 FPM?
• What is the maximum door closing force limit according to safety standards?
• If rope slippage is not corrected, what may need to be done to the sheave?
• How is the weight capacity of an elevator primarily determined?
• What is the poor condition of an elevator often associated with?
• What is the purpose of a car top switch in elevators?
• The car door restrictor limits door opening to _______ if the car is more than _______ from the floor.
• What action should be taken if a mechanical issue is detected during inspection?
• What is the role of test weights in load testing elevators?
• What condition could lead to the car "racking"?
• What is the protocol for testing the emergency stopping systems?
• What should be done if an elevator overspeed condition is detected?
• What does staying informed about new elevator technologies allow technicians to do?
• What is the significance of the elevator pit in hoistway design?
• What are the ANSI standards for elevators?
• How does keeping abreast of new elevator technologies impact service quality?
• How do temperature fluctuations affect hoistway components?
• What does not occur during the annual testing of car and counterweight safety?
• Which part of the elevator system is responsible for vertical guidance?
• Which federal regulations govern elevator maintenance?
• During the five year test, the car buffer must be tested by running the car at what speed?
• In maintaining hoistway safety, which procedure is typically included?
• What is the safety rope also referred to as in a wedge clamp type of safety assembly?
• During an annual test, how should type A, B, or C governor-operated safeties be tested?
• Why is it important to maintain proper lighting in the hoistway?
• Should you Lockout and Tagout the mainline before servicing the door motor?
• What should be checked for wear in the door operator motor brushes?
• Which component is crucial to ensure the elevator does not operate during maintenance?
• What term describes the distance between the counterweight buffer striker plate and the striking surface when the car is level with the top terminal landing?
• Counterweight safeties function to ensure __________.